Fishman ISYS/PRESYS II + Preamp System for Faith Nexus
Faith Guitar models that use this preamp system: All Nexus Models.
Fishman’s Presys 2 onboard Preamp System gives maximum performance in a small, simple footprint. Mounted in the side of the guitar, the Presys 2 is paired with a pre-wired S-core undersaddle piezo pickup.
The preamp has a bright, easy-to-use tuner as standard, a large ergonomic volume control, separate bass and treble EQ controls, and a phase button, which you can press in the event of amplifier feedback. The 6.35mm (1/4inch) jack output is mounted onto the bottom side of the guitar on a plate that has an integral battery box, designed for a PP3, 9-volt battery.
PLEASE NOTE:
We strongly recommend that you spare parts fitted by a qualified guitar technician, electrical service engineer or your local music store.
- Guitar Nuts and Saddles are a default size that may require cutting, sanding or shaping to suit your guitar's unique requirements.
- Bridge pins are also made to a standard size that may require a little sanding to ensure a correct fit as Faith Guitars are handmade and the holes hand-drilled and reamed.
- Removal and replacement of guitar bridges should only be attempted by a professional.
- Guitar pickups and preamps are delicate and will require some technical skill to remove and re-fit.
- Electrical compoments for amplifiers, mixers etc should only ever be fitted by a qualified professional.
We accept no liability for any damage caused by incorrectly fitted spare parts.
Faith Guitar models that use this preamp system: All Nexus Models.
Fishman’s Presys 2 onboard Preamp System gives maximum performance in a small, simple footprint. Mounted in the side of the guitar, the Presys 2 is paired with a pre-wired S-core undersaddle piezo pickup.
The preamp has a bright, easy-to-use tuner as standard, a large ergonomic volume control, separate bass and treble EQ controls, and a phase button, which you can press in the event of amplifier feedback. The 6.35mm (1/4inch) jack output is mounted onto the bottom side of the guitar on a plate that has an integral battery box, designed for a PP3, 9-volt battery.